Simpson 260® Series 6M
Analog - VOM
Simpson Catalog Number Unknown
The front on the Simpson 260-6 changes from the Series 5, by the addition of a "transit" position
at the 500 MA position on the function switch. The 50 Micro Amp jack is also marked as 250 MV.
The Simpson 260-6M has the Taut Band Suspension dial with the three Amp-Clamp scales.
Controls include: Ohms zero adjustment, AC - DC Voltage selector switch,
and a 12 position Function / Range selector switch. Eight recessed probe jacks.
The off or "transit" position is at the 500 MA location.
The back of the case has an "adapter lock" for use with "Add-A-Tester" accessories.
The rear case now has rubber feet instead of raised bumps at the four corners.
More inside views linked below.
This is the first model to use the NEDA 13 F "D" cell and NEDA 1604A (9 Volt) batteries combination.
The separate battery / fuse cover only allows access to the 1 amp fuse, you must remove the
back cover to replace the 2 amp fuse.
Case Size: 5¼ " x 7 " x 3⅛ " - Weight: 3 Pounds
The Adjust-A-View handle can also support the meter in a sloping position for viewing.
Simpson 260-6M Specifications
Ranges 250mV, 1V, 2.5V, 10V ,25V, 50V, 250V, 500V, 1000V
Accuracy 2% of full scale * Sensitivity 20K per volt
Ranges 2.5V, 10V, 25V, 50V, 250V, 500V, 1000V
Accuracy 3% of full scale * Sensitivity 5K per volt
Rated Circuit-To-Ground Voltage 1000V (AC or DC) max.
5 Ranges -20 to +50dB * Reference 0dB= 1mW into 600Ω
Ranges 50μA, 1mA, 10mA, l00mA, 500mA, 10A
Accuracy 1.5% full scale 5OμA, 2.0% of full scale, all other
Voltage Drop: (Nominal) 250mV on 50μA , 1mA; 255mV on 10mA , 10A; 300mV on 100mA, 500mV on 500mA
Ranges Rx 1, Rx 100, Rx 10K
Accuracy 2.5° of arc on Rx1, 2.0° of arc on other
Maximum Indication 0-2KΩ, 0-200Ω, 0-20MΩ
Back To Downloads Back To Main Page